A smarter way to move surplus.
Ask hospital facilities staff to identify emergency power and patient-care dependencies before proposing an outage or removal. Distinguish the hospital's property from equipment belonging to a utility, lessor, or another party. For more than one unit, use separate inventory rows and match each nameplate to its location and available documents. State which accessories are included and identify the person who can answer site and ownership questions.
What matters for this transformer
The pickup address alone is not a loading plan. Explain where the unit sits, what must move first, and whether a truck and lifting equipment can approach the proposed handoff point. Share documented weight, dimensions, photographs, access limits, and any work-window requirements with the carrier and rigging team. Agree separately on disconnection, internal movement, rigging, loading, and freight. The buyer covers freight after the equipment scope, loading responsibilities, and route assumptions are agreed; other work requires its own agreement.
A practical submission includes the nameplate, serial number, owner and authorized contact, plus existing drawings or dated maintenance and storage records. Identify any lease, utility ownership, financing, or other consent that could affect transfer, and leave undocumented details open. An initial inquiry does not require new seller testing and is not a certification of condition or compliance. The site's qualified personnel must control electrical isolation and verification; qualified specialists should handle inspection, fluid concerns, rigging, and loading under an appropriate safety plan.
What to identify before contacting a buyer
For hospital systems, begin with the nameplate and the documents already held by the owner. Record manufacturer, serial number, kVA or MVA rating, primary and secondary voltage, phase, frequency, impedance when shown, taps, cooling designation, enclosure, approximate dimensions, and weight if documented. Photograph the full unit, nameplate, bushings or terminals, gauges, cabinets, radiators, and any visible damage without removing covers. A clean identifier prevents two similar units from being treated as one asset.
Explain whether the transformer is installed, disconnected, staged, indoors, outdoors, or stored. Add the building or bay reference, ownership status, accessories, spare parts, and the reason it is available. Do not convert an unknown into a favorable claim: an absent record is simply an open question for review.
Records and honest condition language
Useful existing records can include a one-line diagram, factory data, commissioning report, maintenance log, inspection note, oil record, prior test report, repair history, storage note, and removal drawing. Send what exists and label the date and source. A buyer can screen a transformer without requiring the seller to perform testing. That does not make the asset tested, compliant, dry, or ready to energize; those conclusions require qualified professionals and appropriate procedures.
Do not assume PCB condition, fluid condition, regulatory status, code compliance, or suitability for a new installation. State what is known, what is unknown, and who can answer technical questions. Trained and qualified personnel should control electrical isolation, grounding, access, fluid handling, lifting, and any inspection or testing that the owner elects to undertake. The buyer’s review is not a substitute for a site safety plan.
Removal, freight, and commercial scope
Describe the practical path from the current position to a truck: disconnect boundary, rigging points, doors, aisle and turning limits, dock or crane access, floor capacity, storage location, loading equipment, and restrictions on work hours. For hospital systems, also flag whether other equipment must be removed first and whether accessories travel with the transformer. These details help separate equipment interest from a feasible removal plan.
The buyer covers freight after the asset scope, loading responsibilities, and route assumptions are agreed. Cash offers and payment are upfront under mutually agreed terms; this is a buyer-only purchase inquiry, not a promise that every unit will be accepted. All voltage classes are considered. No particular amount or timeline is guaranteed, and no seller testing is required for the initial submission.
A clear inquiry checklist
A useful inquiry for hospital systems can contain an itemized asset list, nameplate photographs, overview photographs, available records, location and access notes, ownership confirmation, requested removal boundary, and contact information for qualified site personnel. If multiple units are involved, use one row per serial number and identify whether the offer should cover the group or individual assets.
Ask focused questions about missing data rather than filling gaps with guesses. Keep environmental, electrical, and demolition decisions with the responsible professionals. A careful package lets a buyer respond to the actual transformer and the actual site, while protecting the seller from unsupported claims about condition, compliance, value, or timing.
Questions sellers ask
Is seller testing required before requesting an offer?
No seller testing is required for the initial buyer review. Share existing reports if available and clearly label them; do not describe an untested unit as tested or ready for service. Qualified personnel remain responsible for safe isolation, inspection, and any testing the owner chooses.
What nameplate information should a seller send?
Send manufacturer, serial number, kVA or MVA, primary and secondary voltage, phase, frequency, impedance when shown, taps, cooling, enclosure, dimensions or weight if documented, and clear photographs. Include accessories and the unit’s exact building, bay, or storage reference.
Does the buyer make seller-paid freight arrangements?
Buyer covers freight after the equipment scope, loading duties, access, and route assumptions are agreed. The seller should describe doors, docks, cranes, rigging limits, and site restrictions so freight can be evaluated honestly.
Are all voltage classes considered?
Yes, all voltage classes are considered. Review depends on the actual nameplate, records, physical condition as represented, ownership, and practical removal and freight requirements; consideration is not a promise of acceptance or a specific value.
What should a seller say about PCB status or compliance?
Do not assume either. Provide existing environmental, fluid, inspection, and compliance records when available, identify unknowns, and ask trained or qualified personnel to handle those determinations. The buyer will not treat silence as proof of a favorable condition.
How are offers and payment described?
This is a buyer-only process. A cash offer and payment are upfront under mutually agreed terms after scope and records are reviewed. No particular amount, timeline, local office, or purchase result is promised.

